By: Mihir

Mihir — Fri, 26 Feb 2010 14:29:34 +0000

‘Install the CMU 1394 Digital Camera Driver (yes, even if you dont have/use a firewire camera)’

is this compulsory…cant i interface my laptop webcam with touchlib?please reply.thank you.

By: Laurence Muller

Laurence Muller — Tue, 21 Jul 2009 13:24:58 +0000

Its probably an issue related to the order of the include and library directories. You could try out the suggestion of Jean.

By: volcano

volcano — Tue, 21 Jul 2009 02:23:38 +0000

Thank you for the instructions.
But when i compile the toulib,i get the same error as Richard Z says,there are lots of errors in “C:\Program Files\Microsoft SDKs\Windows\v6.1\Include\intsafe.h(1278) : error C2061 ..” .
I have done following the instructions.
can u give some suggestions? thanks.

By: Jean

Jean — Fri, 17 Jul 2009 05:23:08 +0000

To Sim:
Maybe you could try to change the sequence in include directory and library directory。Making them in the front.

By: Jean

Jean — Fri, 17 Jul 2009 02:53:27 +0000

Thank you for the instructions.
I have compiled the solution.sln in VS2005. but press F5
Pop-up a dailog “Application or DLL c:\multitouch\bin\touchlibd.dll is invalid Windows image.Please check your disk.. “

By: Sim

Sim — Wed, 03 Jun 2009 04:59:54 +0000

I followed your steps but am getting the errors below. Please advice.

1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2146: syntax error : missing ‘)’ before identifier ‘pName’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2146: syntax error : missing ‘;’ before identifier ‘pName’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2460: ‘CBaseReferenceClock::LPCTSTR’ : uses ‘CBaseReferenceClock’, which is being defined
1> c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(75) : see declaration of ‘CBaseReferenceClock’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2146: syntax error : missing ‘;’ before identifier ‘pUnk’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2143: syntax error : missing ‘;’ before ‘*’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2143: syntax error : missing ‘;’ before ‘*’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2059: syntax error : ‘)’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2864: ‘CBaseReferenceClock::pSched’ : only static const integral data members can be initialized within a class
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : error C2143: syntax error : missing ‘;’ before ‘*’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : warning C4183: ‘GetSchedule’: missing return type; assumed to be a member function returning ‘int’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(178) : error C2143: syntax error : missing ‘;’ before ‘*’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(178) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(178) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : error C2065: ‘m_pSchedule’ : undeclared identifier
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(166) : error C2227: left of ‘->GetEvent’ must point to class/struct/union/generic type
1> type is ”unknown-type”
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\sysclock.h(25) : error C2327: ‘CBaseReferenceClock::LPCTSTR’ : is not a type name, static, or enumerator
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\sysclock.h(25) : error C2327: ‘CBaseReferenceClock::LPCTSTR’ : is not a type name, static, or enumerator
1>c:\multitouch\touchlib\src\dsvlcapturefilter.cpp(61) : warning C4995: ’strcpy’: name was marked as #pragma deprecated
1>c:\multitouch\touchlib\src\dsvlcapturefilter.cpp(62) : warning C4995: ’strcpy’: name was marked as #pragma deprecated
1>FilterFactory.cpp
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2146: syntax error : missing ‘)’ before identifier ‘pName’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2146: syntax error : missing ‘;’ before identifier ‘pName’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2460: ‘CBaseReferenceClock::LPCTSTR’ : uses ‘CBaseReferenceClock’, which is being defined
1> c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(75) : see declaration of ‘CBaseReferenceClock’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2146: syntax error : missing ‘;’ before identifier ‘pUnk’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2143: syntax error : missing ‘;’ before ‘*’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2143: syntax error : missing ‘;’ before ‘*’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2059: syntax error : ‘)’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2864: ‘CBaseReferenceClock::pSched’ : only static const integral data members can be initialized within a class
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : error C2143: syntax error : missing ‘;’ before ‘*’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : warning C4183: ‘GetSchedule’: missing return type; assumed to be a member function returning ‘int’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(178) : error C2143: syntax error : missing ‘;’ before ‘*’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(178) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(178) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : error C2065: ‘m_pSchedule’ : undeclared identifier
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(166) : error C2227: left of ‘->GetEvent’ must point to class/struct/union/generic type
1> type is ”unknown-type”
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\sysclock.h(25) : error C2327: ‘CBaseReferenceClock::LPCTSTR’ : is not a type name, static, or enumerator
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\sysclock.h(25) : error C2327: ‘CBaseReferenceClock::LPCTSTR’ : is not a type name, static, or enumerator
1>STREAMS.H included TWICE
1>c:\multitouch\touchlib\include\cropfilter.h : warning C4819: The file contains a character that cannot be represented in the current code page (949). Save the file in Unicode format to prevent data loss
1>c:\multitouch\touchlib\include\barreldistortioncorrectionfilter.h : warning C4819: The file contains a character that cannot be represented in the current code page (949). Save the file in Unicode format to prevent data loss
1>VideoWrapperFilter.cpp
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2146: syntax error : missing ‘)’ before identifier ‘pName’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2146: syntax error : missing ‘;’ before identifier ‘pName’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2460: ‘CBaseReferenceClock::LPCTSTR’ : uses ‘CBaseReferenceClock’, which is being defined
1> c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(75) : see declaration of ‘CBaseReferenceClock’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2146: syntax error : missing ‘;’ before identifier ‘pUnk’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2143: syntax error : missing ‘;’ before ‘*’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2143: syntax error : missing ‘;’ before ‘*’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2059: syntax error : ‘)’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(80) : error C2864: ‘CBaseReferenceClock::pSched’ : only static const integral data members can be initialized within a class
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : error C2143: syntax error : missing ‘;’ before ‘*’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : warning C4183: ‘GetSchedule’: missing return type; assumed to be a member function returning ‘int’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(178) : error C2143: syntax error : missing ‘;’ before ‘*’
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(178) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(178) : error C4430: missing type specifier – int assumed. Note: C++ does not support default-int
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(139) : error C2065: ‘m_pSchedule’ : undeclared identifier
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h(166) : error C2227: left of ‘->GetEvent’ must point to class/struct/union/generic type
1> type is ”unknown-type”
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\sysclock.h(25) : error C2327: ‘CBaseReferenceClock::LPCTSTR’ : is not a type name, static, or enumerator
1>c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\sysclock.h(25) : error C2327: ‘CBaseReferenceClock::LPCTSTR’ : is not a type name, static, or enumerator
1>c:\multitouch\touchlib\src\videowrapperfilter.cpp(8) : warning C4995: ’strcpy’: name was marked as #pragma deprecated
1>c:\multitouch\touchlib\src\videowrapperfilter.cpp(106) : warning C4995: ’sprintf’: name was marked as #pragma deprecated
1>c:\multitouch\touchlib\src\videowrapperfilter.cpp(128) : warning C4995: ’strcpy’: name was marked as #pragma deprecated
1>c:\multitouch\touchlib\src\videowrapperfilter.cpp(129) : warning C4995: ’strcpy’: name was marked as #pragma deprecated
1>c:\multitouch\touchlib\src\videowrapperfilter.cpp(135) : warning C4995: ’strcpy’: name was marked as #pragma deprecated
1>c:\multitouch\touchlib\src\videowrapperfilter.cpp(136) : warning C4995: ’strcpy’: name was marked as #pragma deprecated
1>c:\multitouch\touchlib\src\videowrapperfilter.cpp(145) : warning C4995: ’strcpy’: name was marked as #pragma deprecated
1>c:\multitouch\touchlib\src\videowrapperfilter.cpp(146) : warning C4995: ’strcpy’: name was marked as #pragma deprecated
1>c:\multitouch\touchlib\src\videowrapperfilter.cpp(152) : warning C4995: ’strcpy’: name was marked as #pragma deprecated
1>c:\multitouch\touchlib\src\videowrapperfilter.cpp(153) : warning C4995: ’strcpy’: name was marked as #pragma deprecated
1>c:\multitouch\touchlib\src\videowrapperfilter.cpp(241) : warning C4995: ’strcpy’: name was marked as #pragma deprecated
1>Generating Code…
1>Build log was saved at “file://C:\multitouch\touchlib\src\Debug\BuildLog.htm”
1>touchlib – 75 error(s), 18 warning(s)
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========

By: xlmeng

xlmeng — Tue, 21 Apr 2009 03:22:14 +0000

I had the same problem as LBDL’s. Found the solution here:
http://social.msdn.microsoft.com/forums/en-US/windowsdirectshowdevelopment/thread/5da8f0b8-d2a9-4caf-81e1-7f5788fa1c00/
The solution work for xp and vista

By: LBDL

LBDL — Fri, 17 Apr 2009 18:02:31 +0000

Hi I am getting a lot of compile errors with refclock.h
I am using VS2008 btw but that should make no odds…
any clues
Error 44 error C2061: syntax error : identifier ‘CAMSchedule’ c:\program files\microsoft sdks\windows\v6.1\samples\multimedia\directshow\baseclasses\refclock.h 80 touchlib
for example
I am trying to build touchlib

By: Yenni

Yenni — Mon, 13 Apr 2009 16:09:05 +0000

GL/gl.h

By: Yenni

Yenni — Mon, 13 Apr 2009 16:08:28 +0000

correction , the first line is: #include

Comments on: Touchlib compiling instructions (Windows)

By: Mihir

By: Laurence Muller

By: volcano

By: Jean

By: Jean

By: Sim

By: xlmeng

By: LBDL

By: Yenni

By: Yenni